Custom brass fittings · Binh Duong, Vietnam
Custom brass fittings made in Vietnam, turned to your drawing.
This page is for buyers who reorder the same brass fitting or fitting-style part, in volume. We turn it to your drawing at our lead CNC plant and ship it from Vietnam. To get a quote, send the drawing and your yearly quantity through the quote page; we confirm in writing whether we can make your part before we quote it. We do not take small batches or prototypes.
- Route
- Turned
- Brass fitting-style parts turned to your drawing
- Start with
- STEP
- Or a PDF drawing; we confirm we can make it before we quote
- Quote shows
- Origin
- The production site and country of origin, in writing
For buyers · Read this first
Brass fittings: what we take, and who to call for the rest.
Looking for a Vietnam source for a brass fitting you buy again and again? This is the short version, and it is what the written quote will say.
We take
Brass fittings and fitting-style parts turned to your drawing, ordered again and again. Send the drawing first and we confirm in writing whether it is a part we can make. How the turning itself is set up is on the brass CNC turned parts page and the CNC turning page.
Send a STEP file or a PDF drawing; the quote names the production site and country of origin.
We send elsewhere
Small batches and prototypes: we do not take them, and a prototype shop or a local machine shop is the better fit. Simultaneous five-axis work: not offered; see what five-axis machining means for your part.
Pressure, thread or compliance requirements: list each one on the drawing or in the RFQ. We say in writing whether we can meet it before you commit; none of them is claimed as a standing capability on this page. Fitting bodies made by casting or forging rather than turned: a different route; the sand casting page covers how cast brass and bronze bodies are handled.
Moving a running part to a new supplier? Read how to prepare a machining RFQ and make or buy for machined parts. For the production side, see how a recurring production order runs.
01 — How to send a drawing
What to have ready, in five items.
The quote is only as firm as the drawing and the quantity behind it. Put these on the quote page and the answer comes back in writing.
-
Drawing
A STEP file or a PDF drawing, with every dimension, call-out and note you want held.
-
Annual quantity
How many parts you expect to buy in a year, so the quote can be priced at your volume.
-
Batch size
How many parts each release or purchase order will call for.
-
Material requirement
The brass grade and bar form if your drawing names them, or what the part has to do if it does not.
-
Tolerance requirement
The dimensions that really need a tolerance. Each one is confirmed against your drawing in the written quote.
02 — What you can plan around
The brass fitting set-up, in one table.
If your drawing needs something that is not in this table, say so before tooling, not after first samples.
| Parameter | Specification |
|---|---|
| Process | CNC turning of brass fitting-style parts to your drawing, at our lead CNC plant in Vietnam |
| Order pattern | Recurring orders from one drawing; small batches and prototypes are not taken |
| Volume | Confirmed against your annual quantity and drawing in the written quote |
| Size and material | Confirmed against your drawing before the quote; see brass CNC turned parts |
| Tolerances | Confirmed against your drawing in the written quote |
| Other requirements | Any pressure, thread or compliance requirement on your drawing is answered in writing before the quote |
| Not offered | Small batches · prototypes · simultaneous five-axis machining · Swiss-type turning · live tooling on the lathes |
| Where it is made | Machining and inspection at our lead CNC plant; the quote names the production site and country of origin |
03 — Where this is the wrong fit
When a different supplier is the better call.
Small batches, prototypes and five-axis parts
We are set up for parts you reorder. If your fitting is a one-off, a small batch or a five-axis job, we will say so on the first reply rather than after tooling is committed.
This page does not list the fittings we have made, and it does not claim any rating or approval for a fitting. Your drawing decides, and where the answer is no, you hear it before you spend time on a quote.
04 — Where to read next
This page, and the pages around it.
This page is for fitting-style brass parts. The turning set-up and the production-order flow have their own pages.
Brass CNC turned parts
Turned brass parts you reorder: what we take, what we send elsewhere, and what to have ready.
See brass turned partsCNC turning
The full turning set-up: bar and tube range, machines, volumes and inspection records.
See CNC turningRequest a quote
Send the drawing, annual quantity, batch size, material and tolerance requirements.
Start a quoteDo you make custom brass fittings?
We turn brass fitting-style parts to your drawing at our lead CNC plant in Vietnam, for parts you order again and again. Send the drawing first: we confirm in writing whether we can make it before we quote, and the quote names the production site and the country of origin.
Are you a custom brass fittings supplier in Vietnam?
Yes, for fitting-style brass parts you reorder in volume. We turn them to your drawing at our lead CNC plant and ship them from Vietnam. Send the drawing and your yearly quantity through the quote page, and we confirm in writing whether we can make the part before we quote it.
Which brass grades can I specify for a custom fitting?
Commonly specified free-machining brass grades such as C36000, C3604 and CW614N are confirmed against your drawing and material requirements. Name the grade and bar form on your drawing and we confirm both before the quote.
Do you list the fittings you have made before?
No. This page does not list part types, and it does not promise that a fitting like one you have seen elsewhere can be made. Your drawing decides, and we answer it in writing.
What about pressure, thread or compliance requirements on a fitting?
Put every such requirement on the drawing or in the RFQ. We say in writing whether we can meet each one before you commit. None of them is claimed as a standing capability on this page.
Do you take small batches, prototypes or five-axis fittings?
No. We do not take small batches or prototypes, and we do not offer simultaneous five-axis machining or Swiss-type turning. A prototype shop or a local machine shop is the better fit for those.
What volumes is this page for?
Recurring orders from one drawing, not one-offs. The quantity that fits your fitting, and the minimum order, are confirmed against your annual quantity and drawing in the written quote.
What do I send to get a quote?
A STEP file or a PDF drawing, your annual quantity, the batch size per release, any material requirement and the tolerances that matter. Send them through the quote page.
Send the drawing and the yearly quantity.
STEP or PDF. You get a written answer on whether we can make the part, and a unit price at your volume if we can.