Brass CNC turned parts · Binh Duong, Vietnam
Brass CNC turned parts from Vietnam, for drawings you reorder.
This page is for buyers who order the same turned brass part again and again, in volume. We turn it from your drawing on the CNC lathes at our lead CNC plant and ship it from Vietnam. To get a quote, send the drawing and your yearly quantity through the quote page; we confirm in writing that we can make the part before we quote it. We do not take small batches or prototypes.
- Orders
- Repeat
- Parts you reorder, not one-offs or small batches
- Start with
- STEP
- Or a PDF drawing; we confirm we can make it before we quote
- Quote shows
- Origin
- The production site and country of origin, in writing
For buyers · Read this first
Brass turned parts: what we take, and who to call for the rest.
Looking for a Vietnam source for turned brass parts you buy every month or every quarter? This is the short version, and it is what the written quote will say.
We take
Brass parts turned to your drawing, ordered again and again. Our CNC turning line works on bar and tube roughly 40 mm in diameter and under, and is set up for recurring production parts rather than one-offs. A brass part inside that range is the natural fit; for anything larger, or a brass form you have not seen us quote, send the drawing first.
Cross holes and flats that a lathe cannot cut move to a machining center at the same plant as a second operation, on one PO. Send a STEP file or a PDF drawing; the quote names the production site and country of origin.
We send elsewhere
Small batches and prototypes: we do not take them, and a prototype shop or a local machine shop is the better fit. Simultaneous five-axis work: not offered; see what five-axis machining means for your part. Swiss-type turning: we run conventional CNC lathes.
A grade, bar form or size we have not confirmed for you: we say so on the first reply, before anything is committed. Parts made by casting or forging rather than turned from bar: a different route; the sand casting page covers how cast brass and bronze bodies are handled.
Moving a running part to a new supplier? Read how to prepare a machining RFQ and make or buy for machined parts. For the production side, see how a recurring production order runs. Brass fitting-style parts are covered on the custom brass fittings page.
01 — How to send a drawing
What to have ready, in five items.
The quote is only as firm as the drawing and the quantity behind it. Put these on the quote page and the answer comes back in writing.
-
Drawing
A STEP file or a PDF drawing, with every dimension and note you want held.
-
Annual quantity
How many parts you expect to buy in a year, so the quote can be priced at your volume.
-
Batch size
How many parts each release or purchase order will call for.
-
Material requirement
The brass grade and bar form if your drawing names them, or what the part has to do if it does not. Commonly specified free-machining brass grades such as C36000, C3604 and CW614N are confirmed against your drawing and material requirements.
-
Tolerance requirement
The dimensions that really need a tolerance. Each one is confirmed against your drawing in the written quote.
02 — What you can plan around
The turned brass set-up, in one table.
If your drawing needs something that is not in this table, say so before tooling, not after first samples.
| Parameter | Specification |
|---|---|
| Process | CNC turning of brass parts to your drawing, at our lead CNC plant in Vietnam |
| Order pattern | Recurring orders from one drawing; small batches and prototypes are not taken |
| Volume | Our turning work as a whole is set up for recurring production parts; the quantity for your brass part is confirmed against your annual quantity and drawing in the written quote |
| Size | Our CNC turning line works on bar and tube roughly 40 mm in diameter and under; anything outside that range is checked against your drawing first |
| Material | Brass; grade and bar form are confirmed against your drawing before the quote |
| Tolerances | Confirmed against your drawing in the written quote |
| Not offered | Small batches · prototypes · simultaneous five-axis machining · Swiss-type turning · live tooling on the lathes |
| Inspection records | A first-article report against every toleranced dimension and a dimensional record per lot, available on request |
| Where it is made | Machining and inspection at our lead CNC plant; the quote names the production site and country of origin |
03 — Where this is the wrong fit
When a different supplier is the better call.
Small batches, prototypes and five-axis parts
We are set up for parts you reorder. If your part is a one-off, a small batch or a five-axis job, we will say so on the first reply rather than after tooling is committed.
A brass part larger than our turning range, or in a grade or bar form we have not confirmed for you, is checked against the drawing first. Where the answer is no, you hear it before you spend time on a quote.
04 — Where to read next
This page, and the pages around it.
This page covers turned brass parts. The full turning set-up and the production-order flow have their own pages.
CNC turning
The full turning set-up: bar and tube range, machines, volumes and inspection records.
See CNC turningProduction CNC machining
How a recurring production order runs, from drawing review to a repeat order.
See how an order runsRequest a quote
Send the drawing, annual quantity, batch size, material and tolerance requirements.
Start a quoteDo you make brass CNC turned parts?
Yes, turned to your drawing at our lead CNC plant in Vietnam, for parts you order again and again. Send the drawing first: we confirm in writing that it is a part we can make before we quote, and the quote names the production site and the country of origin.
Are you a brass turned parts manufacturer for recurring orders?
Yes. We turn brass parts from your drawing at our lead CNC plant in Vietnam, for parts you order again and again, and ship them from Vietnam. Send the drawing and your annual quantity through the quote page, and we confirm in writing that we can make the part before we quote it.
Can you do brass CNC machining for high-volume orders?
Yes, for recurring production parts from one drawing. The quantity that fits your part and the batch size per release are confirmed against your annual quantity and drawing in the written quote. We do not take small batches or prototypes.
What brass grade and size can you turn?
We do not publish a grade list or a maximum diameter for brass. Name the grade and bar form on your drawing and we confirm both before the quote. Our CNC turning line as a whole works on bar and tube roughly 40 mm in diameter and under; a part outside that range is checked against the drawing first.
What volumes is this page for?
Recurring orders from one drawing, not one-offs. Our turning work as a whole is set up for recurring production parts; the quantity that fits your brass part, and the minimum order, are confirmed against your annual quantity and drawing in the written quote.
Do you take small batches, prototypes or five-axis brass parts?
No. We do not take small batches or prototypes, and we do not offer simultaneous five-axis machining or Swiss-type turning. A prototype shop or a local machine shop is the better fit for those.
What tolerance do you hold on brass?
Tolerances are confirmed against your drawing in the written quote, not stated in advance on this page. Mark the dimensions that really need a tolerance and we say plainly which ones we can hold.
What do I send to get a quote?
A STEP file or a PDF drawing, your annual quantity, the batch size per release, any material requirement and the tolerances that matter. Send them through the quote page.
Send the drawing and the yearly quantity.
STEP or PDF. You get a written answer on whether we can make the part, and a unit price at your volume if we can.